Maintenance
Maintenance
Overview
This chapter describes the use of configuration files and maintenance-related pages in the
web interface.
In this chapter:
• Configuration Settings File on page 44
• Link Status on page 46
• Option Installation on page 46
• Versions on page 48
Configuration Settings File
This section describes how to download and upload a file that contains the IP Gateway’s
configuration settings.
♦
To download the IP Gateway configuration settings
1. Use a computer connected to the IP Gateway through the network or by a
crossover cable.
2. Connect to the IP Gateway by entering its IP address in your web browser’s
address bar. The default address is 192.168.0.1.
3. If prompted for a password, enter it. The factory-configured password is
8206363.
44 025-9631D.1
To Next Page
Loading...