Zetor 9641 Forterra turbo - Attaching the Carried Implement; Driving with Agricultural Machines Attached in Front Three Point Hitch; Setting the Throttle Valve

142
HITCHES
F 209 F 210 F 211
SETTING THE THROTTLE VAL-
VE
Before starting the work with implement
attached in front three point hitch it is
recommended to set the throttle valve
(3) that way the time needed for
implement lowering from the upper to
the lowest position is 1 to 1,5 sec..
Turning the valve body into left (in arrow
direction) increases the speed of
lowering.
ATTACHING THE CARRIED
IMPLEMENT
The implement is attached into the front
three point hitch forks and is locked by
pins. Fixed and floating position is
provided by pins:
-
fixed position of attached implement
is provided by assembly of pins into
position 1
- floating position of attached imple-
ment is provided by assembly of pins
into position 2
DRIVING WITH AGRICULTU-
RAL MACHINES ATTACHED IN
FRONT THREE POINT HITCH
Reduce the travel speed of tractor when
going with agricultural machines at-
tached in the front three point hitch to
max. 15 km/h.
We recommend removing the lower
lifting arms (1) from supports at tractor
equipped with front three point hitch if
not used for attaching the implement.
Front lower links are disassembled after
removing the safety pins and hitch pins
(2).
PDF byl vytvořen zkušební verzí FinePrint pdfFactory http://www.fineprint.cz