148
TRACTOR MAINTENANCE
INSPECTION AND MAINTENANCE OF TRACTOR
3
After every operating hours
Inspection and maintenance operations
10
70
100
250
600
1200
1800
2400
3000
3600
4200
4800
5400
6000
Check of front wheel toe in X X X X X X X X X X X
Check of inflation pressure in all tires X Every 10 hours
Check of steering function, oil level in tank of hydrostatic steering cir-
cuit
X Every 10 hours
FRONT DRIVING AXLE
Oil change in reduction gears and front driving axle housings * X X X X X
Oil level check in reduction gears and front driving axle housings X Every 200 hours
Greasing of cardan shaft heads X X X
Greasing of king pins X Every 200 hours
Greasing of pivot pin sliding bearings X Every 200 hours
HYDRAULIC SYSTEM
Greasing of force control torsion bar tube X X X X X X X X X X
Greasing of force control connecting rod X Every 200 hours
Greasing of force control stirrup bolt X Every 200 hours
Greasing of auxiliary hydraulic cylinder pins X Every 200 hours
Greasing of lifting tie-rod telescopic control X Every 200 hours
Greasing of right lifting tie-rod of three-point hitch X X X X X X X X X X
Greasing of pins of front three-point hitch X X X X X X X X X X
Check of connections of outer hydraulic circuit of front three-point hitch
for leaks
X Every 10 hours
To Next Page
Loading...
