56
TRACTOR OPERATION
E211 E212 E213
GEAR-SHIFTING
Tractors are equipped with the four-
speed synchronized gearbox, torque
multiplier, reversing unit and two-speed
reduction gear.
The main gearshift lever with buttons to
control the torque multiplier is used to
shift to gears in the four-speed gearbox.
The reversing lever is used to engage
forward and rearward tractor gears.
REVERSING SHIFT LEVER
Use the reversing shift lever to select the
tractor driving direction (forward or re-
verse).
F - forward drive (16 gears)
N - neutral
R - reverse run (16 gears)
The reversing gearbox has 16 reverse
gears, which are approximately so fast
as forward gears. Therefore consider it
well, which gear for the work you will
select.
Shift to the reversing gear with
the clutch pedal depressed at
tractor standstill.
ROAD AND REDUCED GEAR SHIFT-
ING
S - road gear speeds
N - neutral
R - reduced gear speeds
The gear shifting of reduced gears of the
main gearbox is identical to gear shifting
of normal road gears.
The gearshift lever of road and
reduced gears may be shifted
with tractor at standstill only.
To Next Page
Loading...
