54
TRACTOR OPERATION
E207
E208
IMMEDIATELY AFTER START
After starting set the engine
speed to 800 - 1,000 rpm and let
the engine run at idle for about 2
minutes without load.
In the meantime check lubrication,
charging (indicator lights must go out)
and other functions assuring a correct
engine operation. Be sure to keep the
time of engine idle run without any load,
especially in winter season.
ENGINE PREHEATING
Continue to preheat the engine already while driving. Warming up the engine
by long idle run time or fast increase of speed is dangerous for the engine.
Do not exceed the engine speed of 2,000 rpm until the coolant temperature
reaches 45 °C.
To Next Page
Loading...
