Zeversolar Zeverlution 5000 - Disconnecting from Voltage Sources

47 Installation and Operating Instructions V04
9.1.1 Display
The display consists of 16 characters×2 lines. The bottom line shows the current
output (Pac = xxxx.xW). The top line shows the current state by default, it will switch
to different runninginformation by pressing the control button.
1)If the item ‛IP Addr“ on the top line is displayed, thecommunicationconnection state
withZeverCould (Disconnected or Connected) will be displayed on bottom line.
Line 1
Runninginformation
E-today
Daily energy
E-total
Energy generated since the inverter has been installed
Vpv
DC input voltage
Ipv
DC input current
Vac
Grid voltage
Iac
Present output current
Frequency
Grid frequency
Model
Type name
Set Language
Selected language
Version
Firmware version
Serial No.
Serial number
IP Addr
IP address
Line 2
Pac = xxxx.xW
1)
Current output power