Zeversolar Zeverlution 5000 - Important Safety Information

Installation and Operating Instructions V04 4
2.3 Important safety information
• All work on the inverter must only be carried out by qualified personnel who
have read and fully understood all safety information contained in this
document.
• Children must be supervised to ensure that they do not play with this device.
Danger to life due to high voltages of the PV array
When exposed to sunlight, the PV array generates dangerous DCvoltage which
is present in theDC conductors and the live components of the inverter.
Touching the DC conductors or the livecomponents can lead tolethal electric
shocks. If you disconnect the DC connectors from theinverter under load, an
electric arc may occur leading to electric shock and burns.
• Do not touch non-insulated cable ends.
• Do not touch the DC conductors.
• Do not touch any live components of the inverter.
• Have the inverter mounted, installed and commissioned only by qualified
persons with theappropriate skills.
• If an error occurs, have it rectified by qualified persons only.
• Before assembling the DC connectors, please first cover the PV modules
with opaque material..
•
Prior to performing any work on the inverter, disconnect it from all voltage
sources asdescribed in this document (see Chapter 8).