ZiLOG System 8000 Hardware Reference Manual

HRM
COMMAND NA?1E
DISPLAY
SYNTAX
Zilog
HRM
D <address> <# of long words/words/bytes> [LIWIBJ
DESCRIPTION
This command displays at the terminal the contents of speci-
fied memory locations starting at the given address, for the
given number of bytes.
If the count parameter is specified, the contents of the
memory locations are displayed in hexadecimal notation and
as ASCII characters.
If the count parameter is not specified, the memory loca-
tions are displayed as words one at a time, with an oppor-
tunity to change the contents of each location. For each
location, the address is displayed, followed by the contents
of LIWIB and a space. To change the contents at a given
location, enter the new contents in the form long
wordlwordlbyte. If RETURN is pressed, either alone or after
the new contents, the next sequential location is displayed.
Entering a "Q" (for QUIT), followed by a RETURN terminates
the command.
EXAMPLE
Display memory starting at Segment 0, %5200 for 16 words.
[D 5200 10 <CR>
<00> 5200 1808 FE2B 2004 D923 7ED9 CD35 2238 OAED
* .. .+ • • 11 •• •5"8 .. *
<00> 5210 6F23 ED6F 2B1E 0118 EDD9 2218 14D9 5778
*0# .0 ...... H ••• Wx*
EXAMPLE
Display memory starting at Segment 0, %5200 for 16 bytes.
[0 5200 10 B <CR>
<00> 5200 18 08 FE 2B 20 04 09 23 7E 09 CO 35 22
38 OA ED * ... + . . /1 •• •5"8 .. *
5-18
Zilog
5-18

ZiLOG System 8000 Specifications

General

Brand	ZiLOG
Model	System 8000
Category	Desktop
Language	English