ZiLOG System 8000 Hardware Reference Manual

HRM
Zilog
HRM
COMMAND
NAME
DISPLAY
REGISTER
BREAK
NEXT
GO
JUMP
FILL
rOPORT
MOVE
COMPARE
QUIT
PORT
TEST
ZBOOT
PARAMETERS
<address> [<# of long words/words/bytes>] [L:WIBJ
Display and alter memory
[
<register name> ]
Display and alter registers
[<address>J [<n>J
Set and Clear breakpoint
[ <n> ]
Step instruction
Branch to last PC set in user register array
<address>
Branch to address
<address1> <address2> <data>
Fill memory
<port address> [W:BJ
I/O port read/write
<address1> . <address2>
Move memory block
<address1> <address2>
Compare memory blocks
Enter Transparent Mode
<port address> [WIB]
Special I/O read/writ~
Enter Test Mode
[DISIT]
Read a BOOTSTRAP program(s) from SMD, disk
or cartridge tape and execute
NOTE
5-17
All outputs illl Monitor Mode can be suspended with
XOFF (~13 or control-s) and resumed with XON (111
or control-q).
Zilog
5-17

ZiLOG System 8000 Specifications

General

Brand	ZiLOG
Model	System 8000
Category	Desktop
Language	English