ZiLOG System 8000 Hardware Reference Manual

HRM 2ilog
HRM
soft errors it detected, and an indication of whether or not
the line was run to completion, and whether supplied parame-
ters were found' inappropriate and replaced.
The error log remains after the list is completed, as the
only record of completion states of tests in the list.
The A command displays the cumulative error log for ALL
tests in the test list. This log contains the last 20 de-
tailed error messages logged by tests in the list. Each
message contains the test name, the lap number, and error
number, along with a description of the error. This error
log also remains after completion of the test. Refer to Ap-
pendix A for the descriptions of the error messages logged
by the tests.
EDITING AND EDIT LEVEL: The EDIT level is invoked by
entering E, the Edit command. One test list resides in
memory and can be altered using the EDIT LEVEL subcommands.
This list can be a null list containing only a termination
(EDL) line. A window of up to seven lines of the current
list is displayed by the editor. One line of the display is
the current line, marked by *, upon which line-oriented com-
mands operate. Enter an integer to change the current line
of the list.
Previously created and stored test lists can be moved to
memory from the tape with the FETCH command, F. The memory
resident list can be moved to tape with the STORE command,
S. In either case, the test list catalog containing list
descriptions is displayed, and the source· or destination for
the test list can be selected. When storing lists, the list
description in the test list catalog can be changed.
The memory-resident list can be altered in five ways. The
CLEAR command, C, erases the current list by making it a
null list. The DELETE command, D, removes the current line
from the list. The MODIFY command, M, allows the user to
change the repetition count or parameters of the current
line.
The REPLACE command, R, can be used to replace an entire
line. The catalog of tests and control statements is
displayed and the'user makes a choice. Default parameters
and repetition count are supplied and the line is displayed.
The repetition count or parameters can now be reset. When
the line is correct, enter a <CR> to substitute the new line
for the original line of the list and to return to the EDIT
LEVEL.
2ilog
5-49

ZiLOG System 8000 Specifications

General

Brand	ZiLOG
Model	System 8000
Category	Desktop
Language	English