ZiLOG System 8000 Hardware Reference Manual

HRM
Zilog
HRM
The INSERT command, I, presents the catalog of tests and
test lists and then offers an optional reset of default re-
petition count or parameters just as the R command does.
Entering a <CR> when the line is correct, inserts the line
in the test list and displays the catalog of tests for
another insertion. Entering an E, (for EXIT) when the line
is correct, inserts the line in the test list and returns to
the EDIT LEVEL menu.
TAPE MAINTENANCE LEVEL: Three choices are available in the
maintenance menu
The
ADD command, A, queries the user until a catalog entry
for a new diagnostic has been formed. The new entry is
displayed, and the user may edit it. When the user signals
that the entry is correct, the copy of the diagnostic li-
brary in memory is updated, and the diagnostic is appended
to the diagnostic tape library.
NOTE
The new diagnostic must already exist on the SADIE
tape at file 0, track d.
The DELETE command, 0, displays the catalog of tests. The
s~l~cted test is removed from the diagnostic tape library,
and the entry for it is removed from the copy of the copy
of the diagnostic library catalog in memory.
The third choice returns to the COMMAND LEVEL. If the diag-
nostic libr·ary catalog has changed, the new tape is stored
on tape.
QUITTING: The QUIT command, Q, rewinds and unloads the SA-
DIE
tape and returns to the PROM Monitor program.
5.14.2. START and RESET Interactions:
RESETTING
Pressing the RESET button forces a hardware reset. It per-
forms the same function as the QUIT command. It is the only
sure way to abort a malfunctioning diagnostic.
5-50
Zilog
5-50

ZiLOG System 8000 Specifications

General

Brand	ZiLOG
Model	System 8000
Category	Desktop
Language	English