ZiLOG System 8000 Hardware Reference Manual

HRM
2ilog
HRM
When booting is complete, information pertaining to the
current version of the diagnostic tape will appear on
the CRT display. For example:
SADIE (Stand Alone Diagnostic Interactive Executive)
Customer Release: 3.1 Released: February 19, 1982
This display appears momentarily, followed by the COM-
MAND LEVEL menu:
***** COMMAND LEVEL *****
T choose and run single TEST
R REPEAT current single test
L run current test LIST
C
CHOOSE and run a test list
E EDIT test lists
D DISPLAY error log
A display cumulative log of ALL tests in list
M perform tape MAINTENANCE functions
Q QUIT
Enter your choice J=>
After this menu appears, the desired diagnostic function may
be selected by simply entering its letter code in response
to the prompt "Enter your choice] =>". For example, select-
ing T, followed by <CR>, produces:
***** CHOOSE A TEST OR CONTROL LINE *****
followed by a submenu of SADIE tests and the prompt:
Enter your choice ]=>
The
CHOOSE A TEST OR CONTROL LINE submenu presents the cata-
log of tests and control statements available to the user.
In response to the prompt "Enter your choice ]=>", enter the
1- or 2-digit test number in the first column, followed by
<CR>. In the following example, the MMUTST5 is chosen. The
following display appears:
5-65
2ilog
5-65

ZiLOG System 8000 Specifications

General

Brand	ZiLOG
Model	System 8000
Category	Desktop
Language	English