ZiLOG System 8000 - Page 294

HRM
COMMAND: EABORT / DABORT
DESCRIPTION:
Zilog
HRM
EABORT enables an abort-on-<CR> feature. If the user
enters a carriage-return on the console, the current
command line s aborted. This the default for SMDMON.
DABORT disables the abort-on-<CR> feature.
EXAMPLE:
EABORT
1000((READ 1 0 512)(IBLK 1))
During the second command line, entering.a <CR> on the
console aborts the line.
COMMAND: ECORR / DCORR
DESCRIPTION:
ECORR enables error correction on sub~equent packet
commands. The CM:NC bit is o. This is the default
mode for SMDMON.
DCORR disables error correction on subsequent packet
commands. The CM:NC bit is set to 1.
EXAMPLE:
ECORR
READ
DCORR
READ
During the first READ error correction is enabled.
Duririg the second READ, no error correction takes
place.
COMMAND: EINT / DINT
DESCRIPTION:
EINT enables interrupts at the completion of paQket
commands. CR:EI is set whenever WAKEUP is sent to the
controller. This is the default in SMDMON.
DINT disables interrupts at the completion of packet
commands. CR:DI is set whenever WAKEUP is sent.
A-63
Zilog
A-63