MiniAC Plus User Manual
P a g e | 34 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Register password
Click Password to enter the password registration page. Enter a password and re-enter it. Click OK. If the two
entered passwords are different, the prompt "Password not match" will appear.
Note: The password may contain one to eight digits by default.
Register user photo
When a user registered with a photo passes the authentication, the registered photo will be displayed.
Click User Photo, click the camera icon to take a photo. The system will return to the New User interface after
taking a photo.
Note: While registering a face, the system will automatically capture a picture as the user photo. If you do not
want to register a user photo, the system will automatically set the picture captured as the default photo.
Access Control Role
User access control sets the door unlocking rights of each person, including the group that the user belongs to,
the verification mode and whether to apply group time period.
Click Access Control Role > Access Group, assign the registered users to different groups for better
management. New users belong to Group 1 by default, and can be reassigned to other groups. The device
supports up to 99 access control groups.
To Next Page
Loading...
Need help?
General
