MiniAC Plus User Manual
P a g e | 51 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
7.2 Access Logs Setting
Click Access Logs Setting on the System interface.
Whether to capture and save the current snapshot image during verification.
There are 5 modes:
No Photo: No photo is taken during user verification.
Take photo, no save:
Photo is taken but is not saved during verification.
Take photo and save:
Photo is taken and saved during verification.
Save on successful verification:
Photo is taken and saved for each successful
verification.
Save on failed verification: Photo is taken and saved during each failed
verification.
Whether to display the user photo when the user passes verification.
When the remaining record space reaches a set value, the device will
automatically display a remaining record memory warning. Users may disable
the function or set a valid value between 1 and 9999.
Circulation Delete
Access Records
When access records have reached full capacity, the device will automatically
delete a set value of old access records. Users may disable the function or set a
valid value between 1 and 999.
To Next Page
Loading...
Need help?
General
