MiniAC Plus User Manual
P a g e | 58 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
8.1 Interface Settings
You can customize the display style of the main interface.
Click User Interface on the Personalize interface.
To select the main screen wallpaper according to your personal preference.
To select the language of the device.
When there is no operation, and the time exceeds the set value, the device will
automatically go back to the initial interface. You can disable the function or set
the value between 60 and 99999 seconds.
Idle Time To Slide
Show (s)
When there is no operation, and the time exceeds the set value, a slide show will
be played. It can be disabled, or you may set the value between 3 and 999
seconds.
This refers to the time interval switching different slide show pictures. The
function can be disabled, or you may set the interval between 3 and 999 seconds.
If you have activated the sleep mode, when there is no operation, the device will
enter standby mode. Press any key or finger to resume normal working mode.
You can disable this function or set a value within 1-999 minutes.
To Next Page
Loading...
Need help?
General
