MiniAC Plus User Manual
P a g e | 42 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
6.2 PC Connection
To improve the security of data, please set a Comm Key for communication between the device and the PC.
If a Comm Key is set, this connection password must be entered before the device can be connected to the PC
software.
Click PC Connection on the Comm. Settings interface.
Comm Key: The default password is 0, which can changed. The Comm Key may
contain1-6 digits.
Identity number of the device, which ranges between 1 and 254. If the
communication method is RS232/RS485, you need to input this device ID in the
software communication interface.
To Next Page
