MiniAC Plus User Manual
P a g e | 37 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
5 User Role
If you need to assign some specific permissions to certain users, you may edit the “User Defined Role” under the
User Role menu.
You may set the permission scope of the custom role (up to 3 roles) and enroller, that is, the permission scope of
the operation menu.
Click User Role on the main menu interface.
1. Click any item to set a defined role. Click the row of Enable Defined Role to enable this defined role. Click
Name and enter the name of the role.
To Next Page
Loading...
Need help?
General
