ZKTeco MiniAC Plus User Manual

MiniAC Plus User Manual
P a g e | 60 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
1. Click New Bell Schedule to enter the adding interface:
Item
Description
Bell Status
Set whether to enable the bell status.
Bell Time
Atthis time of day, the device automatically rings thebell.
Repeat
Set the repetition cycle of the bell.
Ring Tone
Select a ring tone.
Internal bell delay(s)
Set the duration of the internal bell. Valid values range from 1 to 999 seconds.
2. Back to the Bell Schedules interface, click All Bell Schedules to view the newly added bell.

Edit a bell
On the All Bell Schedules interface, tap the bell to be edited.
Click Edit, the editing method is the same as the operations of adding a bell.
 Delete a bell
On the All Bell Schedules interface, tap the bell to be deleted.
Tap Delete and select [Yes] to delete the bell.

ZKTeco MiniAC Plus Specifications

General

Brand	ZKTeco
Model	MiniAC Plus
Category	IP Access Controllers
Language	English