SpeedFace M4 User Manual
Page | 63 Copyright©2021ZKTECO CO., LTD. All rights reserved.
Note:
1） The door is inaccessible for the whole day when the End Time occurs before the Start Time (such
as 23:57~23:56).
2） It is the time interval for valid access when the End Time occurs after the Start Time (such as
08:00~23:59).
3） The door is accessible for the whole day when the End Time occurs after the Start Time (such that
Start Time is 00:00 and End Time is 23:59).
4） The default Time Zone 1 indicates that the door is open all day long.
9.3 Holiday Settings
Whenever there is a holiday, you may need a special access time; but changing everyone's access time one
by one is extremely cumbersome, so you can set a holiday access time which applies to all the employees,
and the user will be able to open the door during the holidays.
Click Holidays on the Access Control interface.
Add a New Holiday
Click Add Holiday on the Holidays interface and set the holiday parameters.
To Next Page
