ZKTeco SpeedFace-V5L User Manual

2.8-inch Linux Visible Light Product User Manual 35
Delete Blacklist Photo
To delete the photos taken during verifications which are failed.
Delete All Data
To delete information and access records of all registered users.
Delete Admin Role
To remove administrator privileges.
Delete Access Control
To delete all access data.
Delete User Photo
To delete all user photos in the device.
Delete Wallpaper
To delete all wallpapers in the device.
Delete screen savers
To delete the screen savers in the device.
Note: When deleting the access records, attendance photos or blacklisted photos, you may select Delete All or
Delete by Time Range. Selecting Delete by Time Range, you need to set a specific time range to delete all data with
the period.
Select Delete by Time Range. Set the time range and Select Confirm(OK).
8.2 Backup Data
Select Backup Data on the Data Mgt. interface.

ZKTeco SpeedFace-V5L Specifications

General

Face capacity	6000
Housing color	Black, Grey
Event capacity	200000
Built-in processor	Yes
Face recognition duration	1 s
Operating temperature (T-T)	-10 - 45 °C
Temperature measurement range	34 - 45 °C
Temperature measurement accuracy	0.3 °C
Temperature measurement distance	30 - 50 cm
Operating relative humidity (H-H)	10 - 90 %
Input current	3 A
Input voltage	12 V
Ethernet LAN (RJ-45) ports	1
Screen shape	Flat
Display diagonal	5 \
Display technology	TFT
Sensor type	CMOS
Camera resolution (numeric)	2 MP
Type	Face recognition terminal

Weight and Dimensions

Depth (with stand)	22.5 mm
Width (with stand)	91.9 mm
Height (with stand)	220 mm