2.8-inch Linux Visible Light Product User Manual 31
Menu Screen Timeout (s)
When there is no operation, and the time exceeds the set value, the device will
automatically go back to the initial interface. You can disable the function or set
the value between 60 and 99999 seconds.
Idle Time To Slide Show (s)
When there is no operation, and the time exceeds the set value, a slide show will
be played. It can be disabled
, or you may set the value between 3 and 999
seconds.
Slide Show Interval (s)
This refers to the time interval switching different slide show pictures. The
function can be disabled, or you may set the
interval between 3 and 999
seconds.
Idle Time To Sleep (m)
If you have activated the sleep mode, when there is no operation, the device
will enter standby mode. Press any key or finger to resume normal working
mode. You can disable this function or set a value within 1-999 minutes.
To select the main screen style according to your personal preference.
7.2 Voice Settings
Select Voice on the Personalize interface.
Voice Prompt
Select whether to enable voice prompts during operating, press [M/OK] to
enable it.
Keyboard Prompt
Select whether to enable keyboard voice while pressing keyboard, press [M/OK] to
enable it.
Volume
et the volume of device. Press key to increase the volume, press key to
decrease the volume.