ZKTeco SpeedFace-V5L User Manual

2.8-inch Linux Visible Light Product User Manual 3
1.4 Verification Mode
1.4.1 Password Verification
Compare the entered password with the registered User ID and password.
Enter the User ID on the main screen to enter the 1:1 password verification mode.
1. Enter the user ID and press M/OK.
If the user registers face and fingerprint in addition to password, the following screen will appear. Select the
Password icon to enter password verification mode.
2. Input the password and press M/OK.

ZKTeco SpeedFace-V5L Specifications

General

Face capacity	6000
Housing color	Black, Grey
Event capacity	200000
Built-in processor	Yes
Face recognition duration	1 s
Operating temperature (T-T)	-10 - 45 °C
Temperature measurement range	34 - 45 °C
Temperature measurement accuracy	0.3 °C
Temperature measurement distance	30 - 50 cm
Operating relative humidity (H-H)	10 - 90 %
Input current	3 A
Input voltage	12 V
Ethernet LAN (RJ-45) ports	1
Screen shape	Flat
Display diagonal	5 \
Display technology	TFT
Sensor type	CMOS
Camera resolution (numeric)	2 MP
Type	Face recognition terminal

Weight and Dimensions

Depth (with stand)	22.5 mm
Width (with stand)	91.9 mm
Height (with stand)	220 mm