Zodiac VORTEX-PRO VX40 - Section 6. Cleaning and Maintenance; Filter Canister Cleaning Guide

3. Press and hold for 3 to 5 seconds to
delete programming for the selected day.
Press to exit.
To Cancel All Programs:
1. Press to make sure you have exited
the Programming Menu.
2. Press and hold to delete all
programming in the control box.
The display will turn off for one (1) second.
When all programs are cancelled, the current
day and time is displayed on the screen with
no days of the week lit.
Section 6. Cleaning and
Maintenance
WARNING
Toavoidelectricshockandotherhazardswhich
couldresultinpermanentinjuryordeath,disconnect
(unplug)thecontrolboxfromthepowersource
beforeperforminganycleaningandmaintenance.
6.1 Cleaning the Filter Canister
Theltercanistershouldbecleanedattheendofeach
cycle.
1. Make sure the control box cable is disconnected
fromtheelectricaloutletortheoatingcable
has been disconnected from the control box.
2. Remove the cleaner from the water and let
the remaining water drain by maintaining the
cleaner in the vertical position.
3. Set the unit on its wheels.
4. Toremovetheltercanisterassemblyfromthe
cleaner, follow steps 5 through 8.
5. Push the cover lock (1) and lift the cover (2)
until it is secured in the vertical position.
(Figure 24).
2
1
Figure 24. Lift Cleaner Cover
6. Removetheltercanisterassemblyfromthe
body (3), as shown in Figure 25.
H0516700_REV A
16