Zodiac VORTEX-PRO VX40 - Cord Tangling

3
Figure 25. Remove Filter Canister Assembly
7. Push the quick release button on the canister
assembly(4)andpullopenthelterassembly
(5), as shown in Figure 26.
4
5
Figure 26. Open Filter Canister Assembly
8. Separatetheltercanisterfromthelter
support (6), as shown in Figure 27.
6
Figure 27. Remove Filter Canister
9. Emptyalldebrisfromtheltercanister,then
rinsethecanister,theltersupport,andthe
cleaner under water or using a hose, as shown
in Figure 28.
Figure 28. Wash Filter Canister
7
6.2. Cord Tangling
IMPORTANT
Cleanerfloatingcablemaybecometangledifcorrect
procedureisnotfollowedaftereachcleaningcycle.
Tanglingoftheoatingcablecanoccurmorefrequently
when operating the cleaner on the automatic timer
7-Day Programmed Cycle (VX50 4WD and VX55
4WD). Do not leave the cleaner unattended for
prolonged periods and follow the procedure below to
avoid excessive tangling.
17
H0516700_REV A