ZOLL AED 3 - Setting Up the Defibrillator; Connecting Defibrillation Pads

ZOLL AED 3 Operator’s Manual 9
Setting Up the Defibrillator
Follow the steps below to prepare the ZOLL AED 3 defibrillator for use.
1. Remove the defibrillation pads package from the cardboard box in
the shipping container.
2. Plug the defibrillation pads cable connector into the defibrillation
pads port.
WARNING! Do not open sealed defibrillation pads until immediately
prior to use.
WARNING! To prepare for an emergency, keep the defibrillation
pads cable connected to the AED at all times. Do not
reuse defibrillation pads.
< 8 Years (< 55lbs/25kg)
™
2
1
defibrillation pads package
Plug in defibrillation pads cable connector