9650-0914-01 Rev. C 1
Non-Invasive Blood Pressure (NIBP)
Product Description
The Non-Invasive Blood Pressure (NIBP) option on the R Series
®
unit gives you the ability to
take a single blood pressure measurement, STAT measurements (automatically repeated
measurements over a 5 minute period), or automatic measurements at repeating pre-selected
intervals. The blood pressure information (including the patient’s systolic, diastolic and mean
blood pressure values) is shown on the R Series monitor in the NIBP display area, on the left
side of the screen.
For R Series BLS/Plus models, the NIBP option can only be used while the unit is in Manual
mode.
How To Use This Manual
This insert describes how to set up and use the R Series NIBP option. Important safety
information relating to the general use of the R Series NIBP option appears in “Safety
Considerations” on page 2.
Before attempting to use the NIBP option, you must read and understand all the information
contained in the R Series Operator’s Guide, which provides information that operators need for
the safe and effective use and care of the R Series unit.
Thoroughly read the Safety Considerations and Warnings sections in both the R Series
Operator’s Guide and the relevant inserts before operating your R Series product.
SunTech CE Contact
Direct all cuff, hose, and NIBP questions with regards to the Declaration of Conformity with
European Union Directives to the authorized representative for SunTech:
SunTech Medical Instruments Ltd.
Oakfield Industrial Estate
Stantom Harcourt Road
Eynsham, Witney
OX8 ITS
UK
To Next Page
Loading...
Need help?
General
