EasyManuals Logo

ZOLL R Series Manual

ZOLL R Series
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
R SERIES — NON-INVASIVE BLOOD PRESSURE (NIBP) OPTION INSERT
2 www.zoll.com 9650-0914-01 Rev. C
Safety Considerations
General NIBP Safety
Read the R Series Operators Guide and this manual insert before use.
Ensure that the R Series NIBP option is operated by qualified personnel only.
Consult a physician for the proper interpretation of pressure measurements.
Do not use on patients known to be susceptible to bruising.
Use caution when using on elderly hypertensive patients, as such patients may be more
susceptible to bruising.
Route patient hoses carefully to avoid patient entanglement, strangulation or compression of
hose.
Do not select a cuff inflation pressure that exceeds the patient’s expected systolic pressure
by more than 30-40 mmHg (4.0-5.3 kPa). The factory-installed default adult cuff inflation
pressure is 160 mmHg (21.3 kPa) for adult patients, 120 mmHg (16.0 kPa) for pediatric
patients, and 90 mmHg (12.0 kPa) for neonatal patients.
Keep patient, hose and cuff as still as possible during measurement. Patient movement or
vibrations from outside sources, particularly moving vehicles, can degrade measurement
accuracy.
Check patient regularly for signs of skin irritation or impaired circulation in the monitored
limb.
Do not use the NIBP option on a patient when the R Series unit is connected to an ECG
simulator.
If an alarm occurs while the audible alarm indicators are disabled, alarms do not sound;
rather only the visual alarm indicators are displayed.
If the accuracy of measurements is suspect, first check the patient's vital signs by alternate
means. Then check the cuff, hose and R Series NIBP option for proper functioning.
The cuff, hose, and fitting are defibrillation-protected. Using the NIBP option introduces no
risk for shock due to defibrillation. The cuff and hose are non-conductive. Using the NIBP
option introduces no risk for burns due to electrosurgery.
Cuff safety and effectiveness have not been proven on pregnant women.
Do not attach the cuff to a limb being used for IV infusions or any other intravascular
access, therapy or an arterio-venous (AV) shunt.The cuff inflation can temporarily block
blood flow, potentially causing harm to the patient.
Applying the cuff over a wound can cause further injury.
For patients that have had a mastectomy, cuff should be applied to opposite arm.
Blood pressure measurements can be affected by the position of the patient, physiologic
condition, activity level, improper cuff size/application, environment and use outside of the
operating instructions detailed in this manual.
The NIBP module may not operate correctly if used or stored outside the relevant
temperature or humidity ranges described in the specifications on page 28.
Cuff and Hose Safety
Only use cuffs, hoses, and connectors supplied or specified by ZOLL.
Ensure that the hose is not kinked or obstructed before taking measurement.

Other manuals for ZOLL R Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ZOLL R Series and is the answer not in the manual?

ZOLL R Series Specifications

General IconGeneral
Defibrillator TypeManual and AED
PacingYes
ECG MonitoringYes
SpO2 MonitoringYes
FAST-SpO2Yes
IP RatingIP55
Defibrillator WaveformBiphasic
Energy Levels1-360 Joules
DisplayLCD
Pacer TypeDemand
Pacer Rate30-180 ppm
Pacer Output0 – 140 mA
EtCO2 MonitoringOptional
NIBP MonitoringOptional
Temperature MonitoringOptional
PrinterIntegrated
Battery TypeLithium-ion
CPR FeedbackYes
Data StorageInternal memory
ConnectivityUSB

Related product manuals