5. Click the “Browse” button, and pick the firmware file.
6. Click the “Upgrade” button.
7. The upgrade is now completed.
Upgrading the Router on UNIX (using TCP/IP)
1. Log in as root.
2. Ensure that upgrade BIN file is located in your current working directory.
3. Type “tftp <the Firewall router’s IP address>”.
4. At the tftp prompt, type “get upgrade”.
5. Change to binary transfer mode.
6. At the tftp prompt, type “put <upgrade filename>”.
7. Wait for the file transfer to finish.
8. Quit out of tftp.
9. The upgrade is now completed.
44
To Next Page
Loading...
