8. Troubleshooting
Problem A
IP Address Conflicts
If you start up your Windows 95/98/Me or Windows NT/2000/XP computer and the following
message dialog box shows — indicating an IP address conflict — please follow the directions
given below.
Solution
Windows 95/98/Me
1. Click Start, point to Run, and type winipcfg. When done, click the Run button.
2. The Winipcfg screen will then appear as shown in Figure A.
Figure A
3. Click the Release All button. The Winipcfg will then release your current TCP/IP
configuration as shown in Figure B.
Figure B
45
To Next Page
Loading...
