The Play mode is for selecting a patch and playing. When you power-up the 3030, it automatically activates in
Play mode, and the USER group's Bank 0, Patch Number 1 is selected.
In Play mode, the display LEDs on the panel show the following information:
(1) Group
Type of group currently selected is indicated in the display's GROUP column.
(2) Bank Number
The currently selected bank number is indicated in the display's BANK column.
(3) Patch Number
The LED light for the Foot Switch (1 – 4) corresponding to the currently selected patch number.
(4) Effect Module ON/OFF
The panel module cursor LED's light for the effect module that is ON in the currently selected
patch.
(5) EXP/VOL Pedal Function
The parameter cursor LEDS 4 and 5 indicate the function assigned to the EXP/VOL pedal for the
currently selected patch.
.
Panel Display for Play Mode
■
6
LET' S LISTEN TO SOME PATCHES
LET'S LISTEN TO SOME PATCHES (Play Mode Operation)