The 3030 supports a chromatic autotuner function. This function can be used automatically in Bypass or Mute
status.
Tuning Your Guitar (Autotuner Function)
■
11
LET' S LISTEN TO SOME PATCHES
Lightly step on the foot switch whose LED is
currently lit in the display for Foot Switches 1 – 4, and
release your foot straight away.
The 3030 will enter the Bypass status, and you can use the
autotuner function. The display will indicate "", and the
tuner LED's will light.
The autotuner function can be used when the 3030 is in Mute status.
This is handy for tuning on stage when you do not want to produce the
sound externally.
Pick a released string.
The display shows the tone closest to the current pitch. Tune the
guitar until it matches the desired tone.
To tune a bass guitar, use harmonics using a tone one octave higher.
When the display shows the desired tone, adjust
further until the round LED's immediately above the
tuner LED (EFF1's module cursor LED's) light.
When the tuner function is ON, the module cursor LED works as
a meter, measuring the accuracy of the tuning. If the pitch
matches accurately, the middle LED (the EFF1 module LED)
lights.
Press the foot switch again, or select another patch.
The usual Play mode will be returned.
4
3
To Next Page
Loading...
