With the power supply to the 3030 OFF, connect the
foot switch FS01 (optional) to the VOLUME
IN/MANUAL jack.
Power up the 3030.
The 3030 enters Play mode.
Step on the FS01.
The 3030 enters Manual (Edit) mode. In this mode, you can
switch the individual effect modules ON or OFF in the patch
currently selected by using Foot Switches 1 – 4.
When the 3030 is in Bypass or Mute status, pressing the FS01
produces no result.
Manual mode and Edit mode work in just about the same way.
With the optional foot switch FS01, you can use your foot to switch between the Play mode and the Manual
(Edit) mode. This is handy during performance, and is like turning a compact effector ON and OFF. when you
want to add an effect module's effect to a particular part of the music.
Control Using FS01 (Manual Mode)