2 In the Enter Network Password dialog box, type the following User Name and Password in
lower case, then click OK.
User Name: admin
Password: admin
3 The Status page should appear. If the Status page doesn’t appear, please see
Appendix B:
Troubleshooting Tips.
From the Zoom Configuration Manager, you can configure advanced features and make changes to
the default wireless security options including the SSID and Pre-Shared Key.
If you want to change the default SSID or Pre-Shared Key, go to
Changing the Pre-Shared
Key and SSID from the default settings.
If you need instructions for setting up a wireless network, please refer to
Appendix A:
Setting Up Your Wireless Network. (Most newer Windows 7, Vista, and XP
computers with built-in wireless networking capabilities do not require the installation
of a wireless component. If this is the case, you should set up that computer’s wireless
connection if it isn’t already configured using the Windows 7, Vista, or XP connect utility.
See
Appendix A for instructions.)
Otherwise, refer to the Table of Contents to select a specific topic for advanced options.
14
To Next Page
Loading...
