1
Installing the Cable Modem/Router with
Wireless-N
This chapter provides basic instructions for connecting the hardware and configuring the Cable
Modem/Router with Wireless-N using the Zoom Configuration Manager. This chapter is almost
identical to the printed Quick Start.
Package Contents
Your package contains the following items:
• Cable modem/router
• Power cord
• Ethernet RJ-45 cable
• Quick Start flyer
• CD with User Manual
System Requirements
• You need to connect the cable modem/router to a cable modem service that uses any of the
popular DOCSIS standards – 3.0, 2.0, or 1.1. If you need to get cable modem service, please speak
with your cable service provider.
• To use this User Manual, you need a computer, an iPad or another tablet, or a game console.
If your cable service provider provided a cable modem starter kit, please continue below. If you don’t
have or choose not to use the cable modem starter kit from your service provider, go to How to
connect to a computer if you don’t have or choose not to use a cable modem starter kit below.
If your cable service provider provided a cable modem starter kit
Some cable service providers supply a cable modem starter kit that can be useful when you install
your cable modem. The kit may include a coaxial cable for connecting between a wall jack and your
cable modem. (These are also available at most electronics retailers.) The kit will include instructions,
and may also include a CD with software. If you receive a kit like this, we recommend that you read
7
To Next Page
Loading...
