112
To access the Bridging page:
1 Click Wireless in the menu bar.
2 Then click the Bridging submenu.
Figure 36 shows an example of the menu and T
able 29 describes the items you can
select.
Figure 36. Example of Bridging Page
Table 31. Bridging Menu Option
Option Description
Wireless
Bridging
Select to enable or disable wireless bridging.
Remote Bridges
Table of remote bridge MAC addresses authorized to establish a
wireless bridge. Up to 4 remote bridges may be connected.
Typically, you will also have to enter your AP’s MAC address on the
remote bridge. The Cable Modem/Router’s wireless MAC address
can be found on the Wireless Interfaces page.
To Next Page
Loading...
