129
Total Space: Total space available on the USB device.
SMART Status: Self-Monitoring, Analysis, and Reporting
Technology status if the USB device supports this technology.
Approved Device: Indicates whether the USB device has been
approved for use on the gateway.
Add an Approved
Device
Add the selected USB device as an approved device for the Cable
Modem/Router.
Remove an
Approved Device
Remove the selected USB device as an approved device for the
Cable Modem/Router.
Refresh List
Updates the data in the Approved Devices list to display any
changes in status or if a device was added or removed.
Safely Remove
Device
Safely unmounts any selected USB device. This is recommended
before unplugging the USB device from the Cable Modem/Router.
Storage Basic
This page shows you the status of the folders on your USB devices that are shared over
the network.
To access the Storage Basic page:
1 Click USB in the menu bar.
2 Then click the Storage Basic submenu.
Figure 44. Example of Network Attached Storage, Basic Settings page sh
ows an
example of the menu and Table 39. Basic Storage Settings Options describes the items
you can select.
To Next Page
Loading...
