131
Used Space: Used space by the folder.
Total Space: Total space available in the folder.
Storage Advanced
This page allows you to configure the folders on your USB devices that are shared over
the network.
To access the Storage Advanced page:
1 Click USB in the menu bar.
2 Then click the Storage Advanced submenu.
To create a new network folder follow these steps:
1 Click on Create Network Folder.
2 Select the USB device you are creating the folder on.
3 Next to Share Name enter a name to call the folder.
4 Select if you want to only allow admin read and write access to the folder. By
selecting admin access you prevent any users on your network form editing or
deleting any files in the folder.
5 Enter the name of the Folder.
6 Click Apply.
Figure 45. Example of Network Attached Storage, Advanced Settings page shows an
example of t
he menu and Table 40. Advance Settings Menu Options describes the items
you can select.
To Next Page
Loading...
