Zoom 5354 - Page 77


77
Figure 21. Example of port Triggers Page
To activate a port trigger
1 Enter the trigger and target ports range for the Internet traffic to forward to.
2 Select the forwarding protocol(s).
3 Enter a name for your port triggering rule.
4 Check the Enable box to the bottom of the entry to store settings.
5 Click the Apply button to activate the port trigger rules.
Table 15. Port Triggers Menu Option
Option Description
Trigger Range
(Start / End
Port)
Enter the trigger range (starting and ending ports) of the application
for which you want to enable port triggering. The application will
send data from these ports.
Target Range
(Start / End
Port)
Enter the target range (starting and ending ports) to open for the
same application. The application will receive data on these ports.
Protocol
Select the protocol for this rule.
Description
A brief description of the rule you have created.