Zoom 9050 - Page 155

6) All Parches Dump
BYTE DESCRIPTION
:l11 0000 EXCLUSIVE STATUS
Onnn nnnn CXANNZL nnr. nnnn
: c5annel DOH-OFii oz 7FH {See NOYE 1)
0000 OllC DEVICE ID 06H : device No. (ZOOM 905C)
0010 0010 FUNCTION
ID 22H : All Patches Dump
owv vwv
whole of Patch Data in Nemory (22971bytes) (See NOTE 2)
Ovvv vwv
1111 0111 EOX
NOTE
:
1. When this message is received with channel No. 7fh, it should be recognized with
any
charnel.
2. 8-7 Conversion technique is used while Patch Data is transmitted.
7)All Tatch Dump Request
BYTE DESCRI PTIOIU'
1111 0000 EXCLUSIVESTATUS
0101 0010 ZOOM ID 52H
Onnn nnnn CHANNEL nnn nnnn
: channel OOH-OFH or 7FH (See NOTE I)
0000 0110 DEVICE ID 06H : device KO. (ZOOM 9050)
0001
3311 3KCTION I3 13'i : All Pacch Dump Request
1111 0111 EOX
NOTE:
* Recognized only.
When this message
is recognized, All Patch Dump Eessage
will be Transmitted.
1. When this message is received with channel No. 7ft, it should be recognized with
any channel. Then, All Patch Dump Message
is transmi~ted with Basic Channel.
8)Systern data Dump
BYTE DESCRIPTION
1111 OOOC EXCLUSIVE STATUS
Onnn nnnn CHANNEL nnn nnnn
: channel 00H-OFI-I or 7FH (See NOTE 1)
0000 0110 DEVICE ID 06H : device No. [ZOOM 9053)
0010
OOiO FUKCTION ID 23H : System data Dump
Owv vwv
system data (l5lbytes) (NOTE
2)
ovvv vvvv
1111 Cl11 EOX
1. When this message is received with channel No. 7Eh, it should be recognized with
any channel.
2. System Data
Dump Includes Output Mode,MIDI channe1,OMNI On/Off,Program Change
Table and Program change mode.