USB functions
Data exchange with computers (card reader)
66
1. Press .
2. Use to select “USB”,
and press
.
3. Use to select
“SD Card Reader”,
and press
.
4. Connect the to the computer using a USB cable.
NOTE
•
If you want to power the unit using the computer’s USB
bus, connect the cable while the
power is off, and
then turn it on.
•
The following operating systems are supported.
•
Windows XP or later
•
Mac OS X 10.6 or later
Data exchange with computers (card reader)
By connecting with a computer, you can check and copy data on the SD card.
To Next Page
Loading...
