Zoom H6 Handy Recorder - Using VU Meters for Input Levels

Other settings
Using VU meters to check input levels
89
H6 Handy Recorder
Using VU meters to check input levels
1. Press .
2. Use to select
“INPUT&OUTPUT”,
and press
.
3. Use to select
“VU Meter”,
and press
.
4. Use to adjust input
levels and check them
here.
5. Use to adjust the reference that is used for 0VU.
HINT
The reference level can be set between –20dBFS and
–10dBFs. The dBFS unit represents the loudness of the
signal in dB with 0dBFS being the maximum recordable
value for the digital data.
The virtual VU meters can be used to check input levels.