Zoom H6 Handy Recorder - Adjusting Input Signal Monitoring Mix

Other settings
Adjusting the input signal monitoring mix
80
1. Press .
2. Use to select
“INPUT&OUTPUT”,
and press .
3. Use to select
“Monitor Mixer”,
and press .
You can adjust the level and panning of each input signal for the monitoring mix.
4. Change parameters as
desired.
Ŷ Mixing controls
Move cursor/change value: Move up/down
Select parameter to change: Press
Parameter Setting range Explanation
Volume
Mute, −48.0 – +12dB
(in 0.5dB increments)
Adjusts track volume
Panning L100 – CENTER – R100
Adjusts left–right
position of sound.
NOTE
•
The use of volume and panning settings only affect the
monitoring signal. They do not affect the recorded data.
•
Use the Project Mixer to adjust the balance during play-
back. (ĺP.46)
Adjusting the input signal monitoring mix