USB functions
Using as an audio interface
68
Using as an audio interface
You can send signals input through the directly to a computer or iPad as well as output signals from that device through
the
.
1. Press .
2. Use to select “USB”,
and press
.
3. Use to select
“Audio Interface”,
and press
.
4. Use to select “Stereo
Mix” or “Multi track”,
and press
.
NOTE
•
Set to “Stereo Mix”, it is a 2 in/2 out interface. Set to “Multi
Track” it is a 6 in/2 out interface.
•
With an iPad, use Stereo Mix mode. It will not work with
Multi Track mode.
•
When using Stereo Mix mode you can use the recorder’s
mixer to mix all track inputs to stereo. (ĺ P.72)
•
When using Windows, a driver is necessary to use Multi
Track mode. You can download this driver from the ZOOM
website (www.zoom.co.jp).
5. Use to select
“PC/Mac”, “PC/MAC using
battery power” or “iPad
using battery power”,
and press
.
HINT
•
When using a computer that does not provide enough
power through its USB bus and when using phantom
power, select “PC/Mac using battery power”.
•
The “iPad using battery power” setting uses the batteries
in the recorder.
To Next Page
Loading...
Need help?
General
