Zoom H6 Handy Recorder - Monitoring MS-RAW Signals

Other settings
Monitoring MS-RAW signals
82
Monitoring MS-RAW signals
1. Press .
2. Use to select
“INPUT&OUTPUT”,
and press
.
3. Use to select
“MS-RAW Monitor”,
and press
.
When recording in MS-RAW mode, you can monitor the mid mic input through the left channel and the side mic input through
the right channel.
4. Use to
select “RAW”,
and press
.
NOTE
Select “Stereo” if you want to monitor with an ordinary
stereo mix.
MS-RAW mode only