Other functions
Testing SD card performance
96
Testing SD card performance
You can test SD cards to confirm that they can be used with the .
1. Press .
2. Use to select
“SD CARD”,
and press
.
3. Use to select
“Performance Test”,
and press
.
4. Press to start the
performance test.
5. When the test completes,
the result will be shown.
If the MAX access rate is
100%, the result will be
“NG” (no good).
6. To cancel testing,
press
.
NOTE
Even if an SD card is evaluated as “OK” by the performance
test, this does not guarantee that write errors will never
occur. Please use this test just as a guide.
Test progress
Card access rate
To Next Page
Loading...
