RT100 Rough Terrain Crane
When it is necessary to stop the crane, follow these items:
Start to apply the service brake in a sufficient amount of time to let you bring the
Adjust the pressure on the brake pedal according to the weight and speed of the
When the crane is at a slow speed, push and hold the pedal down to fully stop the
(1) In an emergency, push the brake pedal quickly and fully stop the crane immediately.
For a short interval of time, you can have a hard time with the control of the crane.
When you make many hard brake stops, the tire and the brake linings wear
Use more caution when the roads are wet or frozen.
If the service brake indicator does not illuminate when you push the brake pedal,
stop the crane immediately. The crane can have a leak in the hydraulic oil system.
Contact the repair facility.
(2) The crane has dual-circuit brake system. If one side of the systems has a
malfunction, the other side stops the crane.
If the tire blows out suddenly during the move, do not push the brake pedal
immediately. Hold the steering-wheel tightly with two hands, decrease the
speed, and move the crane to a safe area.
To Next Page
Loading...
