RT100 Rough Terrain Crane
A. The crane can do two operations or more at the same time. This increases the quantity
of work that the crane can do.
B. Before you start, make sure that you examine or do the items that follow:
The hydraulic system works correctly and gives a sufficient flow for multifunctioning.
Do not move the joysticks to their limit positions.
Easy, smooth movements are necessary when you do an operation for multifunctioning.
Make sure that you increase the engine RPMs.
Monitor the area as you operate. Do not move a load unless the conditions are safe.
You can only use crane movements that operate at the same time when
there is no load (or when you lift the load away from the ground).
C. Main Winch + Extend or Retract the Boom
You can move the main hook up or down and extend or retract the boom, at the same
time. To do this, push or pull the right joystick and push the left pedal. Refer to Figure 07 -
Figure 07 – 29 Main Winch + Boom Extend or Retract
To Next Page
Loading...
