Zoomlion RT100 - Page 51

05 - 12 RT100 Rough Terrain Crane
(
(
1
1
8
8
)
)
Stop the operation or do not start to lift a load, if one of the items that follows
occurs:
 An overload or if the weight of the load is unknown.
 The load lift moves out of position, the rigging becomes too loose or the load
is out of balance.
 The protective material between the edges of load and wire rope is missing.
 The light level at the job-site goes below a safe work condition.
 Equipment malfunction or damage to the crane that decreases the safe
operation of the crane.