ZTE H108N V.2.1 Configuration manual
Page 14 ZTE Proprietary and Confidential
Here is the WAN configuration to set in Setup->Internet Setup for the WAN1
connection ("connectivity default"):
VPI and VCI each: 8/32
Service Category (QoS): UBR without PCR
Connection Type: bridging
Encapsulation mode: LLC
NAT disabled.
2.2.4 Configuration for standalone device with static IP
With standalone setup only one PC can be directly connected to the Internet, as it
does not use NAT. It is strongly recommended to use some kind of protection on
the computer: firewall and antivirus.
In the WAN side, the router will get a public IP for management. In the LAN side,
the router’s DHCP will provide to your PC a unique IP configured in the pool, that
will be the public line.
To Next Page
Loading...
